Available in:
Europe
Ref:
SI1830SCAN23

The SI 1830 is a centrifugal tank pump with IPX4 protection.

The pump has been designed to be capable of processing acidic (pH> 2) & high temperature condensates (80°C max) and can be used on oil boilers.

With a range of up to 400 l / h, the SI 1830 is also ideal for air conditioners and refrigerated display cases.

 

Robust design with protection IPX4

Float resistant to acids and fuels

Reinforced shock-resistant construction

Ability to discharge condensate up to a height of 3.7m

Capacity up to 400 l / h, with shorter operating times

Low sound level

The pump can be installed in the floor, wall or inside the tank without tank

Easily removable and reversible pump reservoir to allow mounting on the right or on the left of the unit and to be able to choose the output side of the condensate

    Technical details

    • Max flow rate
      1 gph
      400 l/h
    • Max discharge head
      1 ft
      3.7 m
    • Max pressure
      4 m
    • Max suction head
      1 feet
    • Mains supply
      230V~ 50Hz/60Hz - 75 W 0.80A
    • Operation conditions
      15% : 1s ON - 5s OFF
    • Protection
      IPX4
    • Max condensate temperature
      65 °C
    • Max condensate acidity
      pH>2
    • Tank volume
      0.5 L
    • Master pack quantity
      5
    • Safety switch
      NC 4 A resistive - 250V
    • Detection
      3 layers of detection
    shadow
    shadow

    Pump Dimensions

    • Length
      Width
      Height
    • Pump
      221 mm
      100 mm
      106 mm
    • Packaging
      293 mm
      136 mm
      183 mm
    shadow

    SOUND LEVELS

    • at 3,3ft or 1m in application (dBA)
      43.00
    shadow

    Safety standards

    • CE
    • EAC
    • UKCA
    shadow

    ROHS and WEE directives

    • Compliant
    shadow
    One-piece centrifugal pump with tank (0.5L)
    Integrated barb end check valve Ø ext. 10 mm (3/8”)
    Power cord (1.5m, Bare ends – L, N, G)
    Safety switch cord (1m, bare ends)
    Inlet hose: 5 m roll Ø int. 10 mm (3/8”)
    Adaptor Ø int. 24/25 (1’’)
    Straight connector Ø int. 10 mm (3/8”)
    2 screws + 2 plugs