Wall-mounted multifunction displays are often used to display measurements for clean rooms and laboratories.

Kimo’s ATE 310 can display three parameters (for example humidity, temperature and pressure). It can be installed flush-mounted or wall-mounted.

Alternating display of one to three parameters
Three audible and visual alarms
Three analogue inputs 0-5/10 V or 0/4-20 mA
RS485 MODBUS protocol communication
30 pre-programmed units and configurable units
Adjustment certificate

    Measure details

    • Units
      °F, °C, % RH, °Ctw, °Ctd, °Ftd, °Ftw, µA, Pa, m³/s, kPa, ppm, g/kg, kj/kg, m/s, A, mbar, l/s, hPa, mA, mV, V, m³/h, km/h, fpm, inWg, mmH₂O, mmHg, daPa, cfm
    • Alarm
      3 visual and audible alarms
    shadow

    Technical details

    • Parameters
      Air velocity
      CO
      CO₂
      Differential pressure
      Humidity
      Temperature
    • Displays
      2-line display
    • IP Protection
      IP 65
    • Standards
      UKCA
      2011/65/EU RoHS II
      2012/19/EU WEEE
      2014/30/EU EMC
      2014/35/EU Low Voltage
    • Power supply
      24 Vac/Vdc ±10%
    • Outputs
      3 x 0/4-20 mA or 3 x 0-5/10 V
    • Ethernet communication
      No
    • ModBus network
      Yes
    shadow

    Instrument Dimensions

    • Length
      92 mm
    • Width
      44 mm
    • Height
      234 mm
    • Weight
      585 g
    shadow

    Operating temperature

    • Min
      0.00 °C
    • Max
      50.00 °C
    shadow

    Documents