For clean rooms applications, the Si-CPE320 transmitter is flush mountable to avoid disturbing the working environment. It is equipped with a highgrade stainless-steel waterproof front panel with an integrated touch screen.

Equipped with the same technologies as the Si-C320, this panelmounted version provides state-of-the-art reliability and accuracy.

In addition, measurements can be recorded and downloaded via the Sauermann Control application/software.

Si-CPE320: Optional wireless communication module
Si-CPE320-W: Integrated wireless communication module

Technical Data sheet User manual Simplified manual
1 x input for external probe
3 x analogue outputs
Graphic touch display
IP 66, VHP resistant (Vaporized hydrogen peroxide)
Outputs diagnostic
Possibility to edit the channel names

Measure details

  • Units
    ACH, inH₂O, inWc, °Ctf, °F, °Ftf, °C, % RH, °Ctd, °Ftw, Pa, kPa, g/m³, g/kg, kj/kg, mbar, m³/h, mmH₂O, daPa, cfm
  • Alarm
    Buzzer (60 dB at 10 cm)
shadow

Technical details

  • Parameters
    Absolute humidity
    Air Change Rate
    Air velocity
    Airflow
    CO
    VOC
    CO₂
    Dew point
    Differential pressure
    Enthalpy
    Frost point
    Mixing Ratio
    Relative humidity
    Temperature
    Wet-bulb temperature
  • Displays
    Graphic touch display
  • IP Protection
    IP 66, VHP resistant (Vaporized hydrogen peroxide)
  • Standards
    2015/863 EU (RoHS 3)
    UKCA
    2012/19/UE DEEE
    2014/30 UE EMC
    2014/35/EU Low Voltage
    2014/53/UE RED
  • Wireless connection
    1
  • Power supply
    24 VAC / VDC ±10%
  • Outputs
    3 x 0/4-20 mA or 3 x 0-5/10 V (4 wires)
  • Ethernet communication
    No
  • ModBus network
    Yes
shadow

Instrument Dimensions

  • Length
    3 15/16 inches
    100 mm
  • Width
    1 27/32 inches
    47 mm
  • Height
    9 7/32 inches
    234 mm
  • Weight
    1 1/2 pounds
    684.4 g
shadow

Operating temperature

  • Min
    -10.00 °C
    14.00 °F
  • Max
    50.00 °C
    122.00 °F
shadow

Storage temperature

  • Min
    -10.00 °C
    14.00 °F
  • Max
    70.00 °C
    158.00 °F
shadow
1 Si-CPE320 multifunction panel transmitter
1 integrated high accuracy differential pressure sensor (-250 to 250 Pa / -1.0 to 1.0 inH₂O)
3 analogue outputs
1 RS485 interface with ModBus RTU protocol
1 input for probes
1 adjusting certificate
Terminal blocks for power connection, and output connections
1 front pressure connector cap with a pierced hole in the middle
1 silicone cap for closing a rear pressure connector
1 protective cap for frontal interface connection
1 protective cap for the external probe connector
Si-CPE320: Optional wireless communication module
Si-CPE320-W: Integrated wireless communication module
Si-PRO-U-W
Relative humidity and temperature probe
Si-PRO-T-150
Temperature probe
Si-PRO-V-300
Air velocity hotwire probe
compo hygro probes
Hygrometry probes
Si-PRO-U-I-100-H
Heated humidity probe
Si-PRO-CO-CO2-COV
IAQ probes
Si-ACC-WLM
Wireless communication module
Raccords de pression
Transmitters and probes accessories
Si-ACC-BI320
Si-ACC-BI320 Stainless steel housing
sauermann-control-app
Sauermann Control mobile App
Sauermann control laptop
Sauermann Control software
Reach certificate - Si-CPE 320
RoHS certificate

Related products