smart building and comfort

Increasingly sophisticated smart buildings are being developed to improve efficiency, reduce costs and make life easier and healthier for residents and business owners alike.

A key element in the development of smart building is the ability to infuse a high degree of intelligence into managing Indoor Air Quality (IAQ). IAQ refers to the air quality within and around buildings and structures, especially as it relates to the health, safety and comfort of building occupants.

As people spend ~90% of time indoors, indoor air quality plays a significant part in their general state of health. The indoor air in our homes, schools, offices and factories can be twice, or even up to five times more polluted than outdoor air. In recent decades, buildings became more and more airtight to be increasingly energy efficient.

This is why air ventilation has a critical role to play in renewing indoor ambient air to constantly remove all kinds of pollutants, most bio-organisms and some gases. CO2 concentration is nowadays one of the most important IAQ parameters to check, because it is the main indicator of the quality of the air renewal rate, called Air Change Rate (ACR).

Unlike VAC, IAQ focuses on the quality of the air inside a room in order to improve the well-being of its occupants. Comfort in terms of temperature, humidity (hygrometry) and even psychrometric parameters such as wet-bulb globe temperature (WBGT) is an important part of IAQ. Sauermann is committed to ensuring the measurement of all these parameters.

What does a good air change rate help remove from ambient indoor air?
Chemical and physical pollutants Bio-organisms Gases
Volatile organic compounds (VOC)
Formaldehyde (CH2O)
Micro / Nano particles (PM2.5, PM10...)
Bacteria
Viruses
Mould
Carbon dioxide (CO2)
Carbon monoxide (CO)
Ozone (O3)
Nitrogen Oxides (NOx)
Hydrogen Sulphide (H2S)
Sulphur Dioxide (SO2)
Monitoring and regulation

Monitoring and regulation

All modern and modernized buildings are now equipped with a complete ventilation network to renew their indoor air, while managing at least its two main parameters: temperature and hygrometry.

This ventilation system is built around an air handling unit (AHU), which centralizes the equipment needed to circulate the air and regulate its parameters. This is where Sauermann's transmitters come into play . They will constantly monitor the quality of the air flowing out of the AHU. In addition to the exit of AHUs, the transmitters can also monitor air entering rooms inside the building. These stationary instruments ensure high reliability in continuous operation and high measuring accuracy. They transmit their measurements to a central computerized monitoring station to adjust airflow, or trigger alarms in the event of problems with the air supply parameters of the building's AHU.

read more about CO 112

CO 112

CO2 sensor / transmitter

CO2 sensors allow you to measure carbon dioxide.

Kimo’s CO 112 measures CO2 from 0 to 5,000 ppm.

read more about TH 110

TH 110

Humidity and temperature sensor

Kimo’s TH 110 measures humidity and temperature from 5 to 95% RH and from 0 to 50°C or from -20 to +80°C.

Monitoring and regulation
Data logging

Data logging

The monitoring of indoor air quality is also necessary within areas that are usually occupied by people. This type of measurement is provided by data loggers, which have the advantage of being completely autonomous and can be placed anywhere easily.

Most public buildings, offices and schools can rely on occasional controls, but they need to be regular and spanning over several days of activity. These controls are sometimes scheduled to check the indoor air quality's compliance with certain standards of health and safety protection for the occupants.

Some managers of sensitive public buildings will prefer to ensure permanent monitoring of the indoor air in certain occupied spaces. This is sometimes the case with nurseries and schools, and other establishments hosting seniors or people in fragile conditions. Data loggers are also preferred for this type of monitoring because of their very long battery life and their convenience of use.

read more about KCC 320

KCC 320

Temperature / Hygrometry / Atmospheric pressure / CO2

For accurate measurements of CO2, humidity, temperature, and atmospheric pressure, the KCC 320 IAQ Data Logger with wireless connection is the prime choice. It measures up to four recordable parameters simultaneously.

Data logging
Commissioning and maintenance

Commissioning and maintenance

For commissioning or maintenance diagnostics of ventilation systems, handheld devices are the favorite instruments of HVAC professionals. They provide them with reliable measurements in the palm of their hands with mobile tools that offer rock-solid reliability.

Indoor air quality monitoring is an essential part of this type of activity, closely linked to the proper functioning of the indoor air conditioning system. It can also intervene within the scope of inspections intended to verify if the indoor air management complies with the current regulations.

As part of this type of control, the measurement of the CO2 levels is particularly relevant. It allows to determine if the indoor air is sufficiently renewed by the ventilation system. This air renewal rate then directly affects the concentration of pollutants, bio-organisms and harmful gases.

read more about AMI 310

AMI 310

Multifunction

Kimo’s AMI 310 measures simultaneous parameters including pressure, temperature (Pt100 and thermocouple), humidity, air quality (CO/CO2), air velocity, airflow (vane probes and hotwire), and tachometry.

read more about DBM 620

DBM 620

Air Flow Meter

The newly redesigned Sauermann DBM 620 Air Flow Meter is a multipurpose electronic air balancing instrument primarily used for efficiently taking direct air volume readings from air vents. 

Commissioning and maintenance

Products and accessories

More products

Testimonials

MP 110 / 112 / 115

Nkosi Ddhlovu - Technical Sales Executive - Bonner
«

Simple and easy to use. My client was very happy.

»
Our expertise
Over 800 m2  of laboratory space

Over 800 m2 of laboratory space

Our experts provide maintenance, adjustment and calibration services for our measurement instruments.

After-sales service

After-sales service

Our technicians maintain and repair your devices right where they’re made.

Over 20 patents

Over 20 patents

Including our oscillating piston pump technology and the foldable frame system found on our DBM  620 air flow meter.