Detection unit
Replacement detection unit.
Ref: SI33CE01UN23 Available in: Europe
Replacement detection unit.
To increase the length between the detection unit and the pump 3m Extension cable - for use with the Si-2958 detection unit (Si-30,Si-33, Si-52)
To increase the length between the detection unit and the pump 5m Extension cable - for use with the Si-2958 (Si-30,Si-33, Si-52) detection unit.
To connect two Ø 6 mm (1/4'') clear PVC tubes.
To connect two Ø 10 mm (3/8'') clear PVC tubes.
To connect three Ø 6 mm (1/4') clear PVC tubes.
Reduces diameter of tubing coming out of a tank pump from Ø 10 mm (3/8'') to Ø 6 mm (1/4'').
To connect two Ø 6 mm (1/4') clear PVC tubes.
To connect three PVC tubes, one Ø 6 mm int. (1/4") and two Ø 10 mm int. (3/8").
Clear PVC tubing Ø 6 mm (1/4'') for connecting the pump to the discharge outlet. 5 m (16') roll.
To reduce diameter between the AC condensate tank and the detection unit inlet.
To connect tubes of Ø 6 mm (1/4''), Ø 10 mm (3/8") or Ø 12 mm (1/2'') to tubes of 16 mm (5/8''). 5 pieces
Clear PVC tubing Ø 6 mm (1/4'') for connecting the pump to the discharge outlet. 50 m (164') roll.
Clear PVC tubing Ø 6 mm (1/4'') for connecting the pump to the discharge outlet. 50 m (164') roll.
Used to connect Ø 6 mm (1/4'') to the exhaust pipe. The self sealing fitting makes the connection reliable.
This fitting is perfect for connecting transparent pipes on new installations, in combination with a glue suitable for rigid ABS and soft PVC. Inlet: transparent PVC tube Ø int. 6 or 10 mm (1/4'' or 3/8''). Outlet: PVC tube Ø int 20 or 40 mm (1/2'' or 1 1/2'').
In-line non-return valve for Ø 6 mm (1/4'').
To connect two Ø 16 mm (5/8'') rubber tubes together.
To facilitate the installation of the detection unit of a mini pump detection unit into a mini split. Has a diameter of 16 mm (5/8) and is used for tubes coming out of the condensate tray.
For connecting the AC condensate tank outlet to a mini pump detection unit. Ø 15mm (9/16"). Length: 500mm
For connecting the AC condensate tank outlet to a mini pump detection unit. Inlet and outlet: Ø 15mm (9/16"). Length: 35 x 35 mm.
To connect the AC condensate tank outlet to a mini pump detection unit. Inlet and outlet: Ø 15mm (9/16"). Length: 55 mm
This elbow adaptor is used to connect a detection unit to the condensate tray. Its length (142 mm, 6''), width (35 mm, 19/32'') or diameter (16 mm, 5/8'') make it easy to install.
After the installation or the maintenance of a condensate removal pump, this bottle helps clean the system. Previously Ref ACC00401
Replacement floats for the detection blocks of bi-block piston pumps (SI2958 detection unit).
This drain safe device ensures there is no siphoning effect and that the pump will not run dry and stop working. Suitable for 6 mm (1/4'') clear PVC tubes.