Accessibility links Skip to main content

Heating

Condensate pumps for heating applications: tank pumps for gas or oil condensing boilers. Choose powerful, robust pumps that withstand the toughest conditions. They can all evacuate large quantities of hot, acidic and charged condensate.

Condensate tank pumps

Do you have questions about heating ?

Combustion boiler systems produce condensate that is more acidic than the condensate of an air conditioner, very hot and polluted with certain substances from the combustion process. When this condensate cannot drain away to a drainage circuit by gravity alone, a condensate pump detects it in a tank and lifts it to the drain.

Avoiding condensate leaks protects the boiler and the building from water damage, electrical problems and rust.

  • Si-61: piston pump in a neutral white colour with a built-in tank (0.37 l), designed to remove acidic condensate from gas condensing boilers up to 50 kW. Its small size and low noise level make it suitable for installation in a kitchen or living space.

  • Si-1805: compact centrifugal tank pump for gas condensing boilers, up to 500 l/h. It tolerates charged, high-temperature and acidic condensate (pH > 3.4).

  • Si-1850: large tank pump for heavy and contaminated condensate, up to 1100 l/h. It also tolerates charged, high-temperature and acidic condensate (pH > 3.4).

  • Si-83: compact tank pump for heating units up to 40 kW, with a smartphone app that makes installation simple.

  • Si-82 Pack 2: the heating version of the Si-82 centrifugal pump, up to 500 l/h.

  • Si-1830: centrifugal tank pump with IPX4 protection, designed to process acidic (pH > 2) and high-temperature condensate.

See each product page for the full specifications.

On a boiler, the pump alarm does not cut the power supply to the boiler, which would mean an inconvenient loss of heating and hot water. Instead, a normally open alarm circuit closes to power an audible or visual warning when the condensate level gets too high.

The Pressure Safe System is designed for gas boilers. It allows a safe discharge of condensate and of pressure relief valve water.

We recommend calling in a professional about once a year. You can also inspect the detection system and the (often transparent) drain tubes for dirt.

The choice depends on the system in which the pump will be installed:

  • Type of unit: split, ducted, floor-standing, cassette, boiler, refrigerated display case, etc.

  • Power of the heating or cooling system, which determines the quantity of condensate. Climate also matters: in a humid climate the quantity of condensate can be double that of a dry climate.

  • Nature of the condensate: polluted and greasy in a kitchen or hairdresser's, acidic for boilers.

  • Available space, which determines the shape and size of the pump, and where it will be placed (next to, below, inside or remotely above the unit).

  • Type of room, which determines the trade-off between noise and power.

  • Maintenance: not all pumps are easy to detach and clean.

We recommend calling in a professional about once a year, and more often when the pump is exposed to air loaded with particles (flour in a bakery, for example). Check your air conditioner before summer: the mini pump can even foul over winter, when the unit is in heating mode and the pump is out of use.

For a mini pump, clean the reservoir and filter every 3 to 6 months and inspect the wiring and tubing for wear or leaks. The detection unit should be cleaned at the beginning of the season and regularly if the system is used all year round. You can also inspect the detection system and the (often transparent) drain tubes for dirt.

Sauermann condensate removal pumps are covered by a 36-month guarantee. Other Sauermann Industrie products are covered by a 12-month contractual guarantee, and manifolds and instruments in the distribution range by a 24-month guarantee. The guarantee periods start from the date of the invoice. See the Warranty page for the full conditions.

The guarantee does not apply to damage caused by improper use, improper monitoring or maintenance, normal wear and tear or force majeure, nor to consumables and wear parts. It is limited to a credit note for the price paid or a like-for-like replacement. The guarantee should first be claimed from the installer or distributor from whom the product was purchased.

Sauermann pumps are sold through distributors. Use the interactive "Where to buy" map to find your nearest Sauermann condensate pump distributor or to ask about prices.

For any other after-sales question about our pumps, contact your distributor. For calibration, repair, on-site intervention, technical assistance or document requests on instruments, use the Customer Portal: sign in or create your account to access our service offers. You can also use the Contact page of the website.

Contact a sales representative